-
“Converting Female NPT to 1.5 Tri Clamp”
Hey all,
I’m looking for a handful of 2″ female npt to 1.5″ tri-clamp adapters.
Anyone have a lead on some of these or have some lying around?
Cheers,
Dave
-
11 Replies
-
Try McMaster Carr. They seem to have most everything.
-
I checked Brewers Hardware. I was wrong. It was 2″ male npt to 1.5 tri clamp.
-
Yeah I believe I have a few, how many do you need?
-
James: I need three in total.
NavenJohnson: I tried that site and couldn’t find any triclamp at all.
-
They make all our fabricated stainless fittings.
-
glaciertanks.com has them
-
glaciertanks.com has them
If they do, its not on their website. They have 2″ female NPT to 2″ Tri-Clamp, but not 2″ female NPT to 1.5″ tri-clamp. (same as pretty much all the other sites) Unless James is correct and actually has some; I don’t think this fitting exists.
Dave, I think you probably need to go 2″ to 2″ and then add a second fitting to reduce from there. That are have one custom welded together!
-
Hedge: What I have now (for half my tanks) is a 2″-1.5″ F-F NPT then a 1.5″ Male npt-1.5″ triclamp
It works, but its long, has lots of little spots for fluid pooling and leaking and costs a few bucks.
I was hoping to minimize the number of connections and length of the adapters.
-
Just buy the right parts and weld them together!
Ship me the parts and I will weld them for you for free. Just pay for the shipping.
Heck I probably have what you need on the shelf. We keep about $3000-$6000 of stainless parts on the shelf at any given time.
Take Care.
515-559-4879
-
Dave,
I’ve got 2″ TC to 2″ Male NPT and 1.5″ TC to 1.5″ Male NPT. I could have sworn I had a couple pieces of the mismatch combo, but I can’t seem to find them. If you can make either of these work let me know and I’ll send you out one. I can measure up the 1.5″ TC and see if you can cut it and weld on a 2″ ferrule (I have a bunch of those too).
Log in to reply.
English 
Spanish 
German 
French 
Russian